film evaporator

A calculation method of liquid film thickness for high viscosity fluid was put forward by CFD analysis of fluids in thin film evaporator.

通过对薄膜蒸发器内各料液进行CFD分析，针对高粘度物料提出了一种物料膜厚计算方法。

Reasonable application of rotary film evaporator

旋转薄膜蒸发器的合理应用

Performance of falling film evaporator in vertical tube combined with vapor-lift effect: hydrodynamic characteristics

基于气提效应的竖管内降膜蒸发器性能研究：水力学特性

Based on the results, the process calculation of thin film evaporator was realized by synthetically considering the optimum feed rate derived from CFD simulation.

以此为基础，综合考虑CFD数值模拟得出的最佳进料量要求，实现薄膜蒸发器的工艺计算。

The application of film evaporator in the production of sodium sulfide is introduced.

介绍了薄膜蒸发器在硫化碱蒸发工序中的应用情况.

Application of rotary film evaporator with heat-conducting oil furnace in the evaporation of sodium sulfide

导热油炉加热旋转薄膜蒸发器在硫化碱中的应用

Study on the heat transfer performance of spray falling film evaporator with T-shaped fin plates.

T 型翅片板喷淋式降膜蒸发器传热性能研究.

Study on Separation of Residual TDI from TDI-TMP Prepolymer by Thin Film Evaporator

薄膜蒸发器分离聚氨酯固化剂中游离TDI的研究

Numerical Simulation on the Temperature Field and Film Heat Transfer Coefficient of Thin Film Evaporator

薄膜蒸发器温度场及膜内给热系数的数值模拟

Influence of Structure Parameters of Thin Film Evaporator on the Fluid Heat Transfer Performance

薄膜蒸发器结构参数对流体传热性能的影响

Study on the Heat Transfer and Evaporation of Viscous Fluid in the Inner-condensing Wiped Thin Film Evaporator

内冷式刮膜蒸发器粘性流体的传热与蒸发探讨

The horizontal tube film evaporator has the advanced comprehensive index, which can take priority of selection.

水平管液膜蒸发器具有先进的综合指标，是可供优先选择的一种蒸馏设备。

By analysis of the technology, equipments and operating conditions of a thin film evaporator, the vaccum and viscosity controlling systems are advanced.

通过对薄膜蒸发器工艺、设备操作条件的分析，提出了真空和粘度二个控制系统。

72 wt% flake caustic soda production plant equiped with thin film evaporator

薄膜蒸发器配套72%片碱生产装置

Prediction of the Performance of Falling Film Evaporator with Horizontal Tube Bundle Based on a Distributed Parameter Model

基于分布参数模型的水平管式降膜蒸发器模拟

The application of scrapper thin film evaporator on the production of epoxy

刮板薄膜蒸发器在环氧树脂生产中的应用

Heat transfer and evaporating performance of a new-type inner-condensing thin-film evaporator is studied in this paper.

研究了带冷凝器的新型内 冷式 薄膜蒸发器的传热与蒸发性能.

The calculation model of thin film evaporator ( TFE) was developed, the flow of water and viscous fluid was simulated using CFX 4.4 software and the velocity distribution was obtained.

建立了薄膜蒸发器的计算模型，采用大型计算流体力学（CFD）分析软件CFX4.4模拟了薄膜蒸发器内水及粘性料液的流动过程，得到了各种速度分布。

The Application Research of Thin Film Evaporator in Caustic Soda Concentration Process

薄膜蒸发器在烧碱浓缩中的应用研究

Liquid distributor is the key part of falling-film evaporator.

液体分布器是降膜式蒸发器的关键部件.

In this paper, the caustic soda concentration test was done in 1m 2 thin film evaporator laboratory equipment.

本文在1m2薄膜蒸发器试验装置上进行了烧碱浓缩试验。

Process calculation and aided design system of the wiped thin film evaporator based on CFD

基于CFD的刮板式薄膜蒸发器工艺计算及辅助设计系统

So, this thin film evaporator using micro-groove can enhance the heat transfer efficiency and improve the heat transfer performance.

实验结果表明，采用微沟槽结构的细薄膜蒸发器能有效地提高传热效率，改善蒸发器的传热性能。

An experiment system is set up for testing the thin film evaporator by adjusting the fluid amount, heating power and system pressure, with deionized water as the working fluid.

本文搭建了一套实验系统，以去离子水为工质，通过调节进液量、加热功率、系统压力等方法测试所研制蒸发器的传热性能。

The aided design system for thin film evaporator was developed by Visual Basic 6.0 exploiting technology.

以VISUAL BASIC6.0为开发工具，开发了薄膜蒸发器辅助设计系统。

The structure and principle of a high efficiency evaporator& scrapper thin film evaporator and the application situation on the production of bisphenol-A type epoxy was recommended.

介绍了一种高效蒸发设备&刮板薄膜蒸发器的结构、原理以及在双酚A型环氧树脂生产中的应用情况。

Numerical simulation based on mathematical model of distillation process in thin film evaporator and parameters analysis

基于薄膜蒸发器蒸馏过程数学模型的数值模拟及参数分析

On the basic of self-developed 2D parametric design system of thin film evaporator, the 3D parametric design and virtual assembling design of thin film evaporator were realized by the development of SolidWorks based on Visual Basic.

在自行开发的薄膜蒸发器二维参数化设计系统的基础上，通过VISUAL BASIC语言对SolidWorks软件进行二次开发，实现了薄膜蒸发器三维参数化设计及其虚拟装配设计。

3D parametric design of thin film evaporator based on solidWorks

基于SolidWorks的薄膜蒸发器三维参数化设计

Through the application of 3D parametric technology, the design level of thin film evaporator can be improved and the exploiting period can be shortened, and the foundation can be established for subsequent structure optimization analysis.

三维参数化技术的应用不仅提高了薄膜蒸发器的设计水平，缩短了开发周期，并为其进一步结构优化分析奠定基础。